Ibanez Wizard Thin Necks!

Above is the picture that is taken from Jemsite.com and we can see the cross section of an Ibanez Super Wizard and Jem neck. We can see how thin the neck actually is and that thinness isn't actually a placebo effect. Also, note the difference of the back, between a Wizard and a Jem neck. Notice the D and thin U difference respectively? That creates a big difference in terms of "feel", which can also contribute to how thick a neck feels.

Unfortunately, Ibanez no longer produces the Super Wizard necks for their mid range guitar. However, if only they show a cross section of their other current available necks in their catalogues.

Ibanez RG520QS "傷(Kizu)"

"傷(Kizu)" is probably the only one of my Ibanez guitars that doesn't follow my Dimarzio Evolutions configuration. The story started out with my friends giving me a Seymour Duncan Customs pickup for my birthday present in 2010. That is such an evil gift. Anyway, the rationale being, I wanted to build a guitar that might sound like Hizaki's(ヒザキ) guitar, which is an ESP Horizon III fitted with Seymour Duncan Jazz and Customs. But I didn't want an ESP guitar as I felt that the shape of the neck wasn't really to my liking.

At around the same time, there was an ebay auction of an RG520QS, my favorite non prestige RG model of all time. It sports a mahogany body with the standard Made in Japan Ibanez specs. So, after thinking it through, I bought it and had it shipped all the way from the United States to Singapore. When it arrived, I took a look at the guitar's condition and I nearly fainted. There were paint chips around the headstock and the neck had dings all over. The body of the guitar was sand out of shape and the sides of the quilted sapele veneer was being sand away. I knew I had to put my DIY skills into work again.

First thing I did was to dismantle everything and start with the most important part of the guitar, which is the neck. The dings were actually quite extensive and so, I decided to just refinish the neck, to my all favorite hand rubbed Tru-Oil finish. I removed the dings via the steam with hot iron and sand down the raised grain method. After that, I proceed in removing all the clear coat for re-coating of the neck. The neck was being refinished with 4 coats of hand rubbed tru-oil (for guides of doing this please click here)and being buffed down with rubbing compound for that baby butt smooth satin feel.

The next thing to tackle was the body. I initially re-sculpted part of the body with AB Epoxu and repainted the body with a black burst to cover up the veneer which the previous owner sanded away. However, that didn't turn out too well as rattle can sprays can only get me that far. Not to mention, the humidity of Singapore prevents the paint from drying rock hard. At about the same time, someone was selling a RG520QS body in Jemsite, condition almost intact save a few minor paint chips. After thinking about it, I decided that buying that body is way worth it than redoing up the current one, which I kind of hated. So, I bought the body, had it shipped all the way from United States to Singapore and began assembling the guitar.

At about the same time, I bought the neck pickup, Seymour Duncan Jazz from my local Seymour Duncan distributor, Davis GMC. The guitar was then quick assembled with all the hardware installed. I've also added a push pull coil tap pot for more tonal versatility. Mahogany and split humbucker actually gives of a pretty nice twang. The pickups being Alnico 5 based, is less hot compared to Dimarzio Evolutions ans is a tad bit too much on the highs. I've always been a lover of Ceramic based Pickups but this guitar gives me the option of a different tone on different days.

The neck, which is a Super Wizard neck measures 17mm on the first fret and 19mm on the 12th fret with a flat radius of 430mm and sports a Bulbinga stripe which isn't there for cosmetic reasons. It acts as a separate piece of hardwood to counteract the neck tension, therefore making it more resistance to neck warping. The thin profile of this guitar coupled with the flat radius of the fretboard makes shredding really easy. The action is set to a super sick action of 1mm on the 12 fret allowing players the lightest touch possible next to a scalloped neck. Due to the flat radius, players are also able to do high note bending effortlessly without choking the notes halfway.

The guitar got it's name "傷(Kizu)" mainly because the amount of scars it went through before I refinished it to a condition I am satisfied with. "傷(Kizu)" simply means scar in Japanese. In addition to the Seymour Duncan Customs and Jazz pickups, the guitar is also equipped with the Orange Drop and Treble Bleed mod.

Ibanez RG520QS "傷(Kizu)" Specs neck type: 3pc Made in Japan Super Wizard neck with Bulbinga Stipe fingerboard: Rosewood with dot inlay body: Transparent Rootbeer Mahogany body with Quilt Salepe Veneer fret: Jumbo frets bridge: Ibanez Original Edge Bridge neck pu: Seymour Duncan Jazz bridge pu: Seymour Duncan Customs Neck Specs Scale: 648mm/25.5" a : Width at Nut 43mm b : Width at Last Fret 54mm c: Thickness at 1st 17mm d : Thickness at 12th 19mm Radius: 430mmR

Seymour Duncan Jazz Neo classical by Adrian Goh

Ibanez Custom Jem 570 "紫心姫(Shishinhime)"

"紫心姫(Shishinhime)" started out as an Ibanez RG570SA which I've gotten for myself during my trip to Oklahoma USA. I bought this from Ebay and had it shipped over to my hostel in Oklahoma. I wanted an all original RG with super Wizard neck and Original Edge tremolo at that point of time.

I took the liberty of ordering a set of Dimarzio Evolutions while I was there, and had them fitted in once I was back in Singapore. There are no better place to buy Dimarzios. The guitar electronic parts were in bad shape and had to be given a total overhaul. All electronic parts are being changed into Gotoh while Orange drop and treble bleed mod is being added, as per all my other guitars. The guitar later went on being the same way for the next 2 years, without major change or whatsoever.

Recently, there is this seller on Ebay who was clearing his store of all the OEM Jem bodies that he has ever made. One of them is this one featured in the photo. It's made of Alder, Flame Maple and Purple heart. Now, how rare is that? Without second thoughts, I bought it and gave it 4 coats of Tru-Oil finish, bring out the luster of the wood. Unfortunately, the Purple heart, which was purple when it arrived has oxidized and faded to a dark brown shape with a hint of purple. Nonetheless, the body still looks awesome.







The good thing about the OEM Jem body is that it doesn't require me to dowel and redrill the neck. It actually fits like a glove. However, the things that I had to do was to sand down the router marks and fill up the wood chips with the wood dust i acquire from drilling the tremolo claw and stud holes. Especially those caused by routing.

This unique combination of wood gave the guitar a tone that is high on the treble side yet, thanks to the alder wings, it gives off tight and deep lows. This balance out the reflective harshness of the 2 hardwood, maple and purpleheart. Evolutions also sings beautifully with this body as it retains the warmth of the neck and the hotness of the bridge while at the same time being balanced out by the tone wood of the body, making it sound less muffed up compared to basswood.

The neck measures 17mm on the first fret and 19mm on the 12th fret with a flat radius of 430mm and sports a Bulbinga stripe which acts as a separate hardwood to counteracts the neck tension, therefore making it more resistance to neck warping. The thin profile of this guitar coupled with the flat radius of the fretboard makes this guitar a shredder's dream. The action is set to 1mm on the 12 fret giving players the lightest touch possible next to a scalloped neck. Due to the flat radius, players are also able to do high note bending effortlessly without choking the notes halfway.

This guitar got it's name from the purple heart body it sports. "紫心姫(Shishinhime)"means "Purple Heart Princess" in Japanese. As purple heart is a rare timber being used for guitar building, it seem that this would be the only fitting name for the guitar.

Ibanez Custom Jem 570 "紫心姫(Shishinhime)" Specs neck type: 3pc Made in Japan Super Wizard neck with Bulbinga Stipe fingerboard: Rosewood with dot inlay body: Alder, Maple and Purple heart with Hand Rubbed Oil Finish fret: Jumbo frets bridge: Ibanez Original Edge Bridge neck pu: Dimazio Evolution Neck bridge pu: Dimazio Evolution Bridge Neck Specs Scale: 648mm/25.5" a : Width at Nut 43mm b : Width at Last Fret 54mm c: Thickness at 1st 17mm d : Thickness at 12th 19mm Radius: 430mmR

Ibanez RG520EXQS "青鮫牙(Aosamega)"

"青鮫牙(Aosamega)" started out as a RG570EX neck I purchased from a guy who got it from Tom Lee music Hong Kong. Apparently, Tom Lee was selling Ibanez necks. I had a chance to try out an old RG550 and was deeply addicted to the super thin profile of the original wizard neck. At that time, I just bought Aohimaru "青火丸" and decided to just swap the neck over.



After swapping the neck over for a short while, I decided that I actually like the profile of the Made in Japan Wizard II neck and would prefer to keep the guitar as it is. I proceed in switching Aohimaru "青火丸" back to what it was, reinstalling the original neck.

I began hunting all over Ebay for a MIJ RG body and I happened to chanced upon a silver RG520 Body which was supposedly a RG520QS body, made of mahogany. I haven't own a mahogany bodied guitar up till that point and decided to try it anyway, considering that how rare it is at that time to get a Mahogany bodied RG.

I took a gamble, bought it and sanded it down. True enough, it was really a RG520QS, with that Quilted Salepe Veneer. I was astonished. This body later went on to house Ibanez RG(5)270DX "Frankenstein" . The body and neck has a colour mismatch but all is good for the time being. The guitar was then fitted with Dimarzio Evolutions (Since they are my all time favourite Pick ups). Surprising enough, the Evolution paired up nicely with the Mahogany. The warmth and the Treble of the Mahogany body paired up evenly with the Mid bass overdose of the Evolutions.

Recently, I've been surfing around for another guitar body to match up the color of the neck and eventually found a RG520QS that is in blue. The quilt on this body isn't as nice and more subtle but nonetheless, I wanted to retain the mahogany tone within this guitar. I went ahead and bought the guitar, transferred everything over and hence, "青鮫牙(Aosamega)" was born.

As all the parts used to construct this guitar are made in Japan parts, it is technically a made in Japan Guitar. Japanese craftsmanship is still evident in this guitar, in terms of the wood routed, painted and precision. The neck is actually an Ibanez Super Wizard Neck, the thinnest neck Ibanez has ever made and I would believe the thinnest among all electric guitars.

The neck measures 17mm on the first fret and 19mm on the 12th fret with a flat radius of 430mm. There was once, to my horror, I found lacquering flaking off the neck. I am pretty particular on stuff like that and I decided to just sand off everything, and refinished to my favourite neck finish. Hand rubbed oil finish. The neck has aged to a golden hue thus far but nonetheless, baby butt smooth. My favourite part about the Super Wizards is that it also sports a Bulbinga stripe at the back and not because of cosmetic reason. The Bulbinga stripe acts as a separate hardwood that counteracts the neck tension, therefore making it more resistance to neck warping.

This guitar got it's name "青鮫牙(Aosamega)" from the way it looks. "青鮫牙(Aosamega)" means Blue Shark Fang in Japanese. RG570EX necks are fitted with mirror shark tooth inlays and since the color of the guitar is blue , I decided to just call it Blue Shark Fang. In addition to the Evolutions, the guitar is also equipped with the Orange Drop and Treble Bleed mod.





Ibanez RG520EXQS "青鮫牙(Aosamega)" Specs
neck type: 3pc Made in Japan Super Wizard neck with Bulbinga Stipe
fingerboard: Rosewood with dot inlay
body: Transparent blue Mahogany body with Quilt Salepe Veneer
fret: Jumbo frets
bridge: Ibanez Original Edge Bridge
neck pu: Dimazio Evolution Neck
bridge pu: Dimazio Evolution Bridge

Neck Specs
Scale: 648mm/25.5"
a : Width at Nut 43mm
b : Width at Last Fret 54mm
c: Thickness at 1st 17mm
d : Thickness at 12th 19mm
Radius: 430mmR