Recently, I've written about how getting a cheaper guitar for the sake of modding can not only get you an instrument with quality but at the same time also a very rewarding experience. You can read about it here
If I were to presented with the question what guitars I will recommend for this, the first that will come to mind is the Fender Squier Stratocaster series. It doesn't matter which version of the Squier Stratocaster but most of them are generally decent for it's price. For example, the Squier Affinity series is a good platform to start with. Even though it may be a beginner's guitar, the QC of the instrument is generally decent (looking in terms of only the neck and the body). The parts are easy to replace and guarantees a very positive end product.
The neck has a C shape narrow neck, measuring 41mm at the nut with a radius of of 241mm. This sound radius although doesn't allow for low action, it however allows easier chord works (think Jazz Chords).
The body although Basswood is however deemed usually an "inferior" wood, I can assure to all my readers that Basswood in by no means inferior and in fact basswood is tonally similar between different pieces. Basswood has also been used by many well known artist such as Joe Satriani, Paul Gilbert, John Petrucci and Steve Vai.
The main problem with the guitar however is the inferior tremolo bridge that it comes installed with. This is usually one of the main things that kills off the tone of the guitar, considering the strings go through the Tremolo block, which is anchored on the body of the guitar. However, the good news is, the tremolo is easily replaceable and in fact, Guitar Fetish actually made a custom Brass Block Tremolo that is a direct drop into Asian or Mexican made Stratocaster.
The pickups however are below par which is expected of guitars of that price range. It is thin sounding and has too low an output for Rock lovers out there. However, as per majority of the guitars, all of the electronic hardware can be easily swapped out and in our age of the guitar parts that are available to us, we can easily replace the stock pickups with more than satisfying substitutions. Guitar Fetish once again has more than satisfying pickups in the price range that won't leave a hole in your pocket. For the tone purist, you can also consider Dimarzios or Seymour Duncans into the guitar. These branded pickups can definitely leave it's listener contemplating on the quality of the instrument.
Lastly, although the radius of the neck leaves the guitar unable to achieve that low and sick action, however that can be easily rectified by flattening the radius of the frets from 13 onwards. This is known as compound radius. It may seem daunting for first timers but I assure you it isn't as hard as it sounds.
For aspiring DIY-ers or just players who wants a hand in customizing and modifying guitars, do consider the Fender Squier Affinity Stratocaster as a starting platform and a gateway to a guitar you call your own.
Welcome to my humble blog where I write the little things concerning Guitar, especially the Electric guitar. I am an avid Project guitar builder and enjoys DIY projects on guitars. Through this blog, I will share with my readers my experiments, findings, projects, recommendations and more. Do check back now and then while I hope you will be able to find the information provided in this blog useful.
Showing posts with label Squier. Show all posts
Showing posts with label Squier. Show all posts
Saturday, 17 September 2011
Thursday, 1 September 2011
Customed California Squier "Malmsteen"
Customed California Squier "Malmsteen" is the first guitar that is extensively modded and customized by me. It started out as an ordinary Californian Squier which I've bought while browsing in a second hand guitar store. I wanted a scalloped guitar similar to the one Yngwie Malmsteen uses, to practice my light touch fretting technique. Just so happened that I walked into the shop and found this 21 frets Squier (Made in China) that is cream in color, selling for pretty cheap. I also saw that the neck has some hints of birdseye maple grain and thinking that I should have a go in scalloping, I bought the guitar home.
After bringing it back home, I immediately bought some half round file, wood rasp, some sand paper and armed with guts started scalloping the guitar. Scalloping the guitar wasn't honestly hard, just takes a lot of work to get it there. After scalloping the fretboard, I oiled the fretboard with Tung oil for that smooth finish and proceed to setup the guitar again.
The neck warped at first, which was expected after a full deep scallop but what I never expect was to find the first 5 frets buzzing all over. So, what I realized was that they didn't QC the neck properly and to solve the neck buzz issue, the factory merely bow the neck. I proceed to do fret leveling for the guitar, getting rid of all the buzz.
What Is a Malmsteen guitar, if the nut isn't brass right? So I went ahead and bought myself a Brass Nut and cut it myself. The Brass Nut replacement went well and the open strings was noticeably brighter. I also ordered in a set of Malmsteen pick ups (Dimarzio HS4 x2, HS3) and got them installed into the guitar (Yngwie had to swtich camp over to Seymour Duncan after I build this but nonetheless, I do prefer his tone from his old albums). The Electronic parts were then replaced to Gotoh and as per all my guitars, Orange Drop and Treble Bleed Mod.
Shortly after, I acquired an old made in Mexico Fender Stratocaster Alder body. I immediately did a swap over to the new body, while at the same time changing the bridge to a Wilkinson bridge (big steel block). The only problem with the bridge was since it's alignment was made for US neck, the neck alignment was slightly off. But that didnt post too much of a problem. I've also taken the liberty to change the pickguard to limegreen, something closer to Yngwie's guitar.
The guitar was excellent, good acoustics and all but there was something that was still missing for me. I realized that it was the action of the guitar. I couldn't get it to set to really low action, which was what I prefer. So once again, I filed down the frets, making it compound radius. This ensured that I could set it to ridiculous action without the notes choking all over. This made the guitar very playable and feels nothing like a Squier. The slight mis-alignment of the bridge has also been solved after I replaced the bridge with a custom bridge made by Dragon-fire. It also sports a solid steel block, with the exception of the bridge fitting into Mexican or Asian made Strats. The Headstock has also been sand off and replaced with a Fender decal and for the fun of it, I've signed it "Adrian Malmsteen". Technically, the only thing left from the Squier brand is the neck, but nonetheless, it is undeniably a good guitar with good tone.
This guitar is named "Malmsteen" as originally, I thought it would be funny to have a Yngwie Malmsteen like guitar, in the form of a Squier. My DIY bug got the better of me and I just went on and on modifying it, with each step making it closer to a guitar worth over $1000. This guitar remains one of the guitars that I play extensively up till date.
| Customed California Squier "Malmsteen"" Specs neck type: 2pc Maple neck with Skunk stripe fingerboard:Scalloped Maple with dot inlay and Graphtech String Saver String Tree body: Alder fret: Medium Jumbo frets bridge: Custom Vintage Tremolo with Soild Steel Block and Graphtech Classics saddles neck pu: Dimazio HS-4 middle pu: Dimazio HS-4 bridge pu: Dimazio HS-3 Neck Specs Scale: 648mm/25.5" Width at Nut 40.8mm C Shape profile neck Radius: 241mmR |
Dimarzio HS-4 (Neck pickup)
Malmsteen neo classical by Adrian Goh
Dimarzio HS-3 (bridge pickup)
Malmsteen Over the hills and far away by Adrian Goh
Dimarzio HS-4 (neck pickup) clean
Girl from Ipanema Malmsteen by Adrian Goh
Subscribe to:
Posts (Atom)

